9/00805 (LH)
Ordering Code
| 9/00805 | Slam latch LH, with handle |
| 9/00806 | Slam latch RH, with handle |
Specification
| A | Case length | 70 mm |
| B | Case Width | 64 mm |
| C | Case Height | 20 mm |
| D | Bolt Width | 19 mm |
| E | Bolt Projection | 15 mm |
| F | Location (bush) | 32 mm |
| G | Handle Length | 165 mm |
| H | Hole Size (dia) | 5 mm |
| J | Handle Height | 90 mm |
| - | Depth under case | 4 mm |
| - | Total bolt withdraw | 10mm |
| - | Total handle movement | 45˚ |
| - | Min. load for full bolt retraction | 10kg |
- Latch slams against door edge on ramped striker, is released by fitted handle or from reverse side through 8mm square follow bush.
- Handle movement 45°, LH/RH as shown, with four options available.
- Plant-on fixing by bolts or rivets through 5mm diameter holes on flanges. There is a bottom projection of 4mm on follow-bush for location purposes.
- Zinc-plated, with black, nylon-dipped handle.
- Bolt shape a.nd projection variable, although total travel cannot be altered.
- Use with any of our diecast locking handles with 8mm square shaft.
