9/00448 (locking)
9/00406 Striker (stainless)
Single-sided ‘FS’ keys are standard
Ordering Code
| Mild steel models, with plain rim & gasket | |
| 9/00440 | Hook-latch paddle, locking |
| 9/00440B | As above, black |
| 9/00440/01 | As 9/00440,FS880 standard keys |
| 9/00440B/01 | As above, black |
| Stainless models with pierced rim (& gasket) | |
| 9/00448 | Hook-latch paddle, locking |
| 9/00448/01 | As 9/00448,FS880 standard keys |
| 9/00449 | Hook-latch paddle, non-locking |
| 9/00406 | Loop striker (stainless steel) |
Specification
| A | Case length | 140 mm |
| B | Case width | 108 mm |
| C | Hole centres | 95 mm |
| D | Hole centres | 94 mm |
| E | Max travel | 16 mm |
| F | Hook penetration | 32 mm |
| G | Hook engagement | 12 mm |
| H | Hole sizes (dia) | 5 mm |
| J | Maximum depth | 56 mm |
| K | Recess length | 105 mm |
| L | Recess width | 76 mm |
- As door closes, the ramped face of the hook meets striker and is forced laterally (E). Once closed the spring action secures hook under striker loop.
- This model normally has ‘deadbolt’ action. When key cylinder is locked, both flap and hook are held rigid. Paddles therefore will not slam in locked condition.
- Stainless models have pierced rim as shown, with moulded gasket. Mild steel models normally have plain rim (for welded-on mounting).
- ‘FS’ keys as standard with shuttered keyway. Optionally ‘FT’, ‘92’ or ‘DLP’, key types. Non-locking models available.
- Polished stainless steel or mild steel, clear zinc-plated. Optionally, black powder-coated finish.
- With stainless models, case & flap in Grade 304, all other components made in CR4, zinc plated. ‘Hook” is in stainless steel as standard.
